StructureScan Mini XT

StructureScan Mini XT

The StructureScan™ Mini XT is the tool built to handle all your job site and survey needs. This rugged system is designed with an integrated display for single operator data collection and interpretation. Reduce safety risks, financial exposure, costly delays and provide the full-range of services to your customers by adding this concrete scanner to your toolbox.

The Mini XT is ideal for concrete inspection and evaluation. Easily and accurately locate the position and depth of metallic and non-metallic objects in concrete structures, including rebar, conduit, post-tension cables, pan decking, voids and service utilities.
  • Max Depth

    60 cm (24 in)

  • Antenna Frequency

    2700 MHz

  • Weight

    1.8 kg (4 lbs)

  • Storage Capacity

    14.5 GB

  • Optional Software
  • Accessories

    Palm XT, LineTrac XT, Carry Harness, Accessory pole

Typical Uses
The StructureScan Mini XT is typically used to:
  • Find rebar, post tension, conduits, and non-metallic objects
  • Measure slab thickness and void location
  • Concrete scanning and imaging
  • Condition assessment
  • Structure inspection
System Includes
  • StructureScan™ Mini XT with 3D software
  • Lithium-ion battery (2)
  • Dual bay battery charger
  • Rugged transit case
  • Quick Start Guide
  • 2-year warranty
Play Video
Upcoming Training Events
Thu 17

StructureScan Mini XT

Jun 17 @ 9:00 am - 4:00 pm
Wed 30

StructureScan Mini XT

Jun 30 @ 9:00 am - 4:00 pm
View All Events
GSSI StructureScan Mini XT Ssytem for Concrete Inspection
The Professional Scanner's Choice
The StructureScan Mini XT is the right tool to conquer all your job site needs.
  • High Frequency, High Resolution Concrete Antenna

    The StructureScan Mini XT employs a 2.7 GHz antenna that provides excellent near surface resolution while also maintaining the ability to resolve deeper targets.

  • Enhanced Target Visualization

    The StructureScan Mini XT provides multiple modes for data collection and interpretation:

    Scan EZ: With the press of just one button, this mode provides the ideal amount of information with 2D data views for efficient mark-and-go surveys
    Scan Max: Focus mode is designed to simplify the data to better highlight embedments, locate voids and see closely spaced targets
    Scan 3D: 3D visualization is often used in complicated structural scenarios where the survey area may contain multiple levels of targets. This mode helps the user visualize congested areas and non-linear targets

  • StructureScan Mini XT Kit
    Increase Job Site Efficiency with Mini XT Kit

    Today’s professional scanners need a variety of tools to conquer all job site obstacles. For large survey areas the extension pole allows for better ergonomics and ease of use. Using the Mini XT harness and Palm XT antenna together allows the user to collect data with one-hand operation ensuring you maintain 3 points of contact to comply with OSHA regulations.

Data Examples
StructureScan Mini XT - Identify Structural Features
Identify Structural Features

Data was collected with the Mini XT on a large concrete wall of a flood control system. Data shows multiple layers of rebar. Long flat reflector (green line) is due to the system running on top of the longitudinal rebar. Blue box indicates the back side of wall.

StructureScan Mini XT - Identify Bottom of Slab
Detecting Bottom of Slab

Data was collected using Mini XT with the Palm XT antenna and shows wire mesh (red dots) with 15 cm (6 in) spacing over pandecking (blue line).

Mini XT: Enhanced Visualization with Cross Polarization
Enhanced Visualization: Cross Polarization

The two sections of data below were collected with Mini XT and Palm XT antenna over the same area and in the same direction. Data shows a top layer of heavy wire mesh with multiple cascading plastic and steel targets.

Data on left was collected using cross polarization method and shows a series of targets (blue dots) that are not clearly visible using the normal data collection method (right).

Enhanced Visualization: Focus Mode

Data collected with Mini XT and Palm XT antenna showing multiple layers of structural steel. Focus mode function allows user to simultaneously view raw and focus data using the slider bar.

StructureScan Mini XT - 3D Virtual Borehole Feature
3D Data with Virtual Borehole Feature

3D data set collected with Mini XT and Palm XT antenna showing structural support within a wall in a parking garage. This data is visible on the Mini XT screen after the 3D grid has been compiled. The size of the Borehole feature is user-selectable after the grid is complete.

Specifications
Display6.5” Touchscreen LED
Environmental RatingIP65
Display ModesLinescan, Focus and 3D
Available PortsUSB
LanguagesEnglish, French, Japanese and Chinese
Operating Temperature-4°F to 104°F (-20°C to 40°C)
Accessories
Contact our Sales Team

Please provide the following information and we will contact you shortly.
If you prefer, call 603-893-1109. If you need to contact Training, click here.







This form collects the information that you provide to us. Check our Privacy Policy for the full story on how we protect and manage your submitted data.