GPR System Accessories

NX Telescoping Pole accessory with a universal RAM ball interface. Adjustable from 0.5 m (1.7 ft) to 1.2 m (4.0 ft). Compatible with Flex NX/LT and NX25/NX15. Fits inside Flex NX transit case and in Flex Backpack side pocket.

Tether Module enabling a wired connection between NX25/NX15 and Flex NX/LT.

NOTE: Tether Module required for using NX25/NX15 with Flex LT.

Backpack for one Flex NX or Flex LT, one dual bay battery charger, up to three Flex NX/LT batteries, and accessories. Inside pocket for tablet, outside pockets for telescoping pole and other items, and external mounting system for NX25/NX15 travel pouches.

Rugged transit case for one Flex NX or Flex LT, one NX25, one NX15, telescoping pole, dual bay battery charger, up to four NX25/NX15 satellite antenna batteries, up to four Flex NX/LT batteries, and other system accessories.

Backpack for carrying NX25 and NX15 antennas, one dual bay battery charger, up to four NX25/NX15 batteries, and accessories. Inside pocket for tablet, outside pockets for telescoping pole and other items.

** Shown with NX25 satellite antenna, not included.

Soft travel pouch capable of holding either NX25 or NX15, NX survey wheel, NX Tether Module and two batteries. Compatible with Flex Backpack mounting system. Includes two carabiners.

The Palm Antenna offers users the ability to reach tightly spaced areas that were previously inaccessible such as corners, against walls and around obstructions. The antenna includes a dedicated survey wheel, a replaceable skid plate, and removable handle to reduce antenna height, if necessary. The Palm Antenna is 3 m (9 ft) in length, and is compatible with the SIR 4000 and SIR 30 control units.

Palm XT is a small form factor GPR antenna that allows users unprecedented access in tightly spaced areas and enables easy overhead scanning.

• 2300 MHz antenna offers superior depth penetration and high resolution
• Full keypad control on the antenna top provides remote control of user interface
• Three data collection modes: Standard, Side Car and Cross Polarization
• Multi-Positional Survey Wheel to quickly change between data collection modes

The Palm XT survey wheel adapter allows users to quickly change between normal and cross polarization mode on the antenna. The adapter kit includes high strength, abrasion and impact resistant thermoplastic molded parts, screws for installation on top of the Palm XT, and installation guide. This kit is available for Palm XT’s manufactured prior to August 2020.

LineTrac XT adds the ability to detect AC power and induced RF present in conduits. This accessory detects low amplitude AC signals associated with difficult to locate conduits.

• Seamless fusion with GPR data
• Aids in target discrimination
• Detection at 50/60 Hz
• Rugged, IP65 rated enclosure

The StructureScan Mini XT harness is designed for applications where the user requires the use of both hands during a survey. The harness is single strap and safely secures the StructureScan Mini XT system in the body of the harness with the use of a Velcro door. It is ideally suited for operators who prefer standing surveys and/or using the extension pole accessories.

The extension pole for the StructureScan Mini XT and Mini LXT has a six-button remote operation to allow for easier scanning on walls and floors.

The Palm XT is a satellite antenna designed specifically for the StructureScan Mini XT. The extension pole for the Palm XT is an extendable handle for easier scanning on walls and floors. Please note, there is no remote button operation for this accessory.

LineTrac adds the ability to detect AC power and induced RF energy present in buried utilities. This accessory is compatible with the 300/800 DF antenna and the 350 HS antenna.

• Designed to work with existing RD transmitters
• 20 Hz to 50 KHz active frequency bandwith
• IP65 rated enclosure
• Seamless fusion with GPR data

The Model 656 rugged four-wheel cart is specifically designed for the UtilityScan system. This cart is meant for rugged variable terrain.

The Model 626 cart is an additional cart option designed for the UtilityScan System. This 3-wheel cart includes a specifically built center positioned bracket to hold the UtilityScan system chassis.

The 626 cart is best suited for uneven terrain and grassy field areas.

This custom foam Pelican Case is designed for the UtilityScan system and all its accessories. This transit case is designed for users who need to ship or to protect the system from wet or hazardous environments.

The sunshade for the Panasonic G1 allows users to view the screen readily in high ambient light conditions. The sunshade features a special slot for finger access for the touchscreen display.

The sunshade for the Consumer-grade tablet allows users to view the screen readily in high ambient light conditions. The sunshade features a special slot for finger access for the touchscreen display.

The upgrade kit for the PaveScan allows single sensor users to upgrade their systems to three sensors for better pavement coverage. This accessory includes two sensors, arm extensions and two cables.

The antenna vehicle front mount is an accessory to the RoadScan system. This mount is designed for semi-permanent installation on a vehicle. For in-use operation, welding a mounting bracket to the vehicle frame will be required.

The antenna vehicle trailer mount is an accessory to the RoadScan system. This mount is an attachable/removable option for users that prefer to use the vehicle trailer hitch. This mount can be easily broken down for storage and transportation.

The wheel kit is compatible for the 200 HS antenna and future GS Series antennas. This kit comes with 4 wheels and proper mounting brackets to attach onto the antenna. The wheel kit will help decrease the wear on the bottom of the antenna and is built for easier travel in high wear data collection areas such as asphalt and concrete.

This custom foam Pelican Case is designed for the GS Series accessories. This transit case holds the HS Module, Panasonic Toughpad Tablet, SIR 4000 WiFi Module, optional wheel kit, tow handle, batteries and battery charger.

The Model 620 survey wheel provides distance encoding and precise linear positioning along a transect. This survey wheel is appropriate for all mid-to-low frequency antennas.

The 8 Channel Sync kit is an accessory for the SIR 30 to combine two four channel systems together. This accessory kit includes all the cabling necessary perform this function.

The SIR 4000 harness is designed for applications where the user requires the use of both hands during the survey. The harness mounts on to the user’s waist and shoulders to easily distribute the weight of the controller.

The SIR 4000 stand is designed for concrete applications where the user needs to prop up the control unit for viewing the data. This stand includes user-replaceable plastic feet that are designed to allow the stand to be used on rough surfaces.

The Reach RS2+ is a survey-grade-capable GPS that operates as a single unit or in base/rover mode with two units. The RS2+ is compatible with UtilityScan, UtilityScan Pro, UtilityScan DF/HS, 200 HS antenna, RoadScan, and PaveScan 2.0.

The Geode GPS is a Multi-GNSS with 9-pin serial port, 1 Hz model. The Geode GPS is compatible with the UtilityScan, PaveScan RDM 2.0 and SIR 4000 based systems.

The GPS tripod is constructed with carbon fiber tubing and ram mount fixings. It is compatible with both GSSI’s 3-wheel and 4-wheel carts.