Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 

The following applies to Class A products: 

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.  

 Class A systems include; StructureScan Mini XT, UtilityScan, SIR 4000, SIR 4000 Wi-Fi, SIR 30, Model D50300800, Model 50350HS, Model 50200HS 

The following applies to Class B products: 

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  

• • Reorient or relocate the receiving antenna.  
  • Increase the separation between the equipment and receiver.  
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
  • Consult the dealer or an experienced radio/TV technician for help. 

 Class B systems include; StructureScan Mini LT, SIR 30E 

FCC GPR Antenna Notice 

The device complies with part 15, subpart F of the FCC Rules: 

Operation is subject to the following conditions: 

1. The device may not cause harmful interference, and 
2. The device must accept any interference received, including interference that may cause undesired operation 

Warning: Changes or modifications to the GPR unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 

Operation of the device is restricted to law enforcement, fire and rescue officials, scientific research institutes, commercial mining companies, construction companies and private parties operating on behalf of these groups. Operation by any other party is a violation of 47 U.S.C. § 301 and could subject the operator to serious legal penalties. 

Canadian Requirements of RSS-220 for Ground Antennas 

The Ground Penetrating Radar device shall be operated only when in contact with or within 1 m of the ground. 

The Ground Penetrating Radar device shall be operated only by law enforcement agencies, scientific research institutes, commercial mining companies, construction companies, and emergency rescue or firefighting organizations. 

Cet appareil de radar de sol (ou géoradar) ne doit être utilisé qu’en contact avec le sol ou à 1 m maximum au dessus du sol. 

Cet appareil de radar de sol ne doit être utilisé que par les forces de l’ordre, les instituts de recherche scientifiques, les sociétés minières, les sociétés de construction, et les organisations de secours d’urgence ou de combat du feu. 

Canadian Requirements of RSS-220 for Controllers 

The device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 

(1) the device may not cause interference, and
(2) the device must accept any interference, including interference that may cause undesired operation of the device. 

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:  

(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonction